Detailed introduction to the advantages of medium hard tooth surface reduction motors

The medium hard tooth surface reduction motor is a kind of industrial equipment and is a type of hard tooth surface reduction motor. The fast shaft speed ratio of the hard tooth surface reduction motor shall not exceed 1500r/min; while the fast shaft speed ratio of the medium hard tooth surface reduction motor shall not exceed 1000r/min, the speed on the gear circumference shall not exceed 16m/s, and the operating temperature shall be -40-45℃.

Medium hard tooth surface reduction motors are widely used in transmission mechanisms of various equipment such as transportation, metallurgy, mining, chemical plants, and light industry.

Features of medium hard tooth surface reduction motor:

1. Wide transmission ratio range, nominal diameter transmission ratio is 10-200;

2. The gear transmission efficiency is high, the second level can reach 96%, and the third level can reach 94%;

3. Stable operation and low noise;

4. Since 42CrMo and 35CrMo are used for forging and heat treatment, the gear shaft and gear are made separately, with long service life and high load-bearing capacity;

5. Easy to install.

Compared with the hard tooth surface reduction motor which cannot exceed 1500r/min, the speed ratio of the medium hard tooth surface reduction motor must not exceed 1000r/min, so when purchasing, you should determine it according to your own application! If you are not sure how to choose, you can contact the manufacturer's professional technicians for effective communication and clearly choose the appropriate reduction motor equipment.

Recommended reading

CGH-090L1-10-P1

Governor

CGXZ042

In what industries are hard-tooth surface reduction motors used in light-load motor equipment?

Several key technical parameters to measure the performance of planetary reducer