Common problems and solutions for right angle reduction motor accessories

In the long-term operation of right-angle reduction motors, common faults such as parts wear and water leakage often occur. Generally, the following situations occur:

1. The wear of the rolling bearing chamber of the right-angle reduction motor also includes the grinding of the rolling bearing chamber of the housing, the rolling bearing chamber of the box hole, and the rolling bearing chamber of the transmission.

2. The rolling bearing of the reducer shaft is worn.

3. The reducer sleeve journal is worn, mainly at the shaft, health groove, etc.

4. The fusion surface of the reducer is leaking.

For water leakage problems, the traditional method must dismantle and open the reducer, replace the sealing gasket or wipe the sealant, which is not only time-consuming, but also cannot guarantee the sealing effect. For wear problems, polymer material adjustment methods of polymer materials are often used, which have comprehensive effects such as strong adhesion and excellent tensile strength. Adjusting the applied fiber material can avoid harmful stress during mechanical processing. During welding repair, the thickness can be adjusted without restriction to match the metal composite material of the goods. In this way, the impact of the machine and equipment can be absorbed and the wear and tear may be avoided again. occurs and greatly increases the service life of applied mechanical equipment components.

Recommended reading

Stepper motor

Three phase motor

Stepper motor

There are several types of linear reduction motors

Solution to sudden failure of reduction motor