Source:Industry News Release time:2022-08-05 Clicks: Popular:Reduction motor manufacturer
Stirred vessels are often called stirred tanks (or stirred tanks), and when a stirring device is used as a reactor, it is also called a stirred tank reactor, and sometimes a reactor.
The structure of the kettle body is usually a vertical cylindrical shape, and its height-to-diameter ratio is mainly determined by the height-to-diameter ratio of the liquid in the container and the charging coefficient during operation. The height-to-diameter ratio of the liquid in the container depends on the nature of the material in the container, the stirring characteristics and the number of layers of the agitator.
1. Gear reduction motor. This series of single-stage reduction motor can be used as a speed ratio of 1/200, up to 1/2000, or even higher. The advantages of gear reduction motors are smooth operation, higher efficiency than turbine reduction motors, and moderate price. Good quality, low price, and many brands.
2. Turbine reduction motor, this series is divided into cast iron and aluminum alloy. The center height of cast iron turbine can reach about 350, and the center height of aluminum alloy can reach about 90. If it were any higher, it would not be very safe. Compared with gears, worm reducers are less efficient but have a self-locking function. In some cases, a turbocharger must be used.
3. SEW series reduction motors. SEW is the world's number one brand of reduction motors. It has four series, most of which are used in large equipment and are quite expensive. But now there are many imitation SEW manufacturers in China. If you use SEW series products, you don’t have to worry about the versatility.
4. Planetary reduction motor, this series of reduction motor is a high-precision reduction motor. The highest accuracy that can be achieved internationally is 1 arc minute. It is a commonly used product for standard machines in today's society.
5. Cycloidal pinwheel reduction motor, there are many domestic manufacturers making this series.
Recommended reading
Related Information
Planetary reducer
2020-12-21CGXK115
2021-01-13Fixed speed motor
2020-12-21Planetary reducer
2021-04-15CGX085
2021-01-13CGF-042L1-8-P2
2020-12-21Stepper motor
2020-12-21CGX042
2021-01-13Small reduction motor
2020-12-21Planetary reducer
2021-04-15Three phase motor
2020-12-21Planetary reducer
2020-12-21CGX115
2021-01-13CGX060
2021-01-13Stepper motor
2021-04-14Briefly describe the main features of stepper motors and stepper motor drivers
2022-07-18Selection of important parameters of angle planetary reducer
2022-11-28Working principle and application analysis of screw stepper motor
2022-07-11Causes of excessive operating noise of the corner reducer
2022-11-08Design principles of hard tooth surface reducer in automation applications
2022-09-23Indicator terms for stepper motors
2022-03-08Working principle and usage analysis of screw stepper motor
2022-06-15How to deal with reduction motor noise?
2022-12-06Analysis of shaft breakage problem of right-angle planetary reducer
2022-10-11Analyze the speed characteristics of stepper motors
2022-02-26Stepper motor linear modules for laser machines
2022-06-01Introduction to stepper motor drive control chip types
2022-07-07Characteristics of four series of reduction motors: R, F, K and S
2022-08-15Three-phase stepper motor structural characteristics and technical parameters
2022-07-14Introduction to the characteristics of common linear reduction motors
2022-06-20