The difference between reduction motor and ordinary motor

Reduced motor refers to the integration of reducer and motor. This integrated body can also be called a gear reduction motor, which is usually integrated and assembled by a professional reducer manufacturer and supplied in complete sets. Reduced motors are widely used in the steel industry, machinery industry, etc. The advantages of the popular micro reduction motor in the 21st century are simple design and space saving, while the power, reduction ratio and torque are not reduced. A reduction motor generally combines an electric motor, an internal combustion engine or other high-speed power equipment through a combination of gears of different sizes inside the reduction motor to achieve the effect of increasing or decreasing torque. The editor below will introduce to you the "difference between reduction motors and ordinary motors and the characteristics of reduction motors."

1. The difference between reduction motor and ordinary motor

Check if there is a gear reducer:

The common one is a through-shaft, where all parts are surrounded and the power is directly transmitted to the ring gear of the engine. There are no bearings at the front and rear, only copper sleeves. The gear motor is divided into two parts, the rear end is the motor and the front end is the planetary reduction mechanism, both of which are needle roller bearings and single groove ball bearings. Gear motors have a longer life than regular motors.

The reduction motor is generally an ordinary DC motor, but a gear reducer is added in front of the ordinary motor. Reducers are generally used for low-speed and high-torque transmission equipment. The motor, internal combustion engine or other high-speed running power achieves the purpose of deceleration by meshing the gear with a small number of teeth on the input shaft of the reducer and the large gear on the output shaft. Ordinary reduction motors will also have several pairs of gears with the same principle to achieve the ideal reduction effect, the gear ratio of the large and small gears.

2. Characteristics of reduction motor

1. The reduction motor is manufactured in accordance with international technical requirements and has high technical content.

2. Space saving, reliable and durable, strong overload capacity, power up to 95KW or more.

3. Low energy consumption, superior performance, and efficiency as high as 95%.

4. Small vibration, low noise, high energy saving, high-quality segment steel material, rigid cast iron box, and high-frequency heat treatment on the gear surface.

5. Precision processing ensures positioning accuracy. All these constitute the gear reduction motor of the gear transmission assembly. Various types of motor configurations form electromechanical integration, fully ensuring the quality characteristics of the product.

6. The product adopts serialization and modular design ideas and has wide adaptability. This series of products has an extremely rich range of motor combinations, installation positions and structural solutions, and any speed and various structural forms can be selected according to actual needs.

Recommended reading

CGX060

Governor

CGXZK115

Introduction to windings of angle reducer

Analysis of measurement methods for stepper motor speed changes