Source：Industry News Release time：2022-09-20 Clicks： Popular：Reduction motor manufacturer
Hard tooth surface reduction motors mainly include parallel shaft series products and vertical shaft series products. Parallel shaft reduction motors are manufactured according to industry standards (GBl9004-88). It mainly includes four series of products: ZDY (unipolar), ZLY (secondary level), ZSY (third level), and (fourth level). The vertical shaft reduction motor is manufactured according to industry standards (JB/T9002-1999). The transmission system with the input shaft and output shaft arranged vertically mainly includes three series of products: DBY, DCY and DFY.
Scope of application of hard tooth surface reduction motor:
(1) The input speed ratio is generally n, ≤1500r/min.
(2) The speed on the circumference of the transmission gear shall not exceed 20m/s.
(3) Office environment - 40~50℃. If the temperature is lower than 0℃, the grease should be heated to above 0℃ before operation. Geared motors are available for operation in both directions.
(4) It can be widely used in industrial sectors such as metallurgical industry, mining, chemical plants, decorative building materials, hoisting, transportation, textile industry, paper industry, instruments and equipment, plastics, rubber, engineering machinery and equipment, electric power, etc.
1. The fast shaft speed of the hard-tooth surface cylindrical gear reduction motor shall not exceed 1500 rpm.
2. The peripheral speed of the transmission gear shall not exceed 20m/s.
3. Working temperature is -40-45°C. If it is below 0°C, the grease should be heated to above 0°C before operation.
Features of hard tooth surface reduction motor:
(1) Key parameters such as core distance and nominal reduction ratio are designed for reliability. The key is zero and the components are interchangeable.
(2) The transmission gear is made of high-quality carbon steel that has been nitrided and heat-treated, and the tooth surface strength reaches HRC54-62.
(3) Small size, light weight, high precision, large load-bearing capacity, high efficiency, long service life, high stability, stable transmission system and low noise.
Recommended reading
Related Information
Brake motor
2020-12-21Stepper motor
2021-04-14CGF-042L2-16-P2
2020-12-21CGXZ085
2021-01-13CGXZ115
2021-01-13Stepper motor
2020-12-21CGX042
2021-01-13CGX142
2021-01-13CGXZK085
2021-01-13Speed control device
2021-01-13CGXK115
2021-01-13Stepper motor
2021-04-14Right angle motor
2020-12-21Planetary reducer
2020-12-21CGXZK042
2021-01-13The dangers of adding too much lubricating oil to the reducer
2022-12-28Detailed introduction to the advantages of medium hard tooth surface reduction motors
2022-09-17Indicator terms for stepper motors
2022-03-08There are several types of linear reduction motors
2022-11-02Analysis of the application characteristics of stepper motors in 3D printers
2022-06-02The function and working principle of reduction motor
2022-08-10Analysis of measurement methods for stepper motor speed changes
2022-07-14Daily maintenance of disc planetary reducer
2022-10-08Introduction to cylindrical gear reduction motor
2022-08-24Proper grease can effectively reduce the wear of the disc planetary reducer
2022-09-27Characteristics of four series of reduction motors: R, F, K and S
2022-08-15The impact of acceleration and deceleration settings on the normal operation of stepper motors
2022-06-24Precautions for assembly of reducer
2022-09-27Analysis of maintenance knowledge of reduction motor
2022-07-26Introduction to stepper motor drive control chip types
2022-07-07The main products include AC, DC, deceleration, speed regulation, brake motors, power 6W-3700W, linear motors (including flat plate, rod type)
13316953177
About
Products
Solutions
Support
News
13316953177
20 years of focus on R&D and production of reduction motors for automation equipment
CN
location：