What are the advantages of geared motors that can meet the needs of major enterprises?

What are the advantages of geared motors that can meet the needs of major enterprises?

1. Reduced motors have occupied half of the machinery industry market, and demand is still on the rise. What is the reason why reduction motors have become an urgently needed component in the machinery industry? So what are the advantages of reduction motors?

First, the reduction motor can effectively keep the motor working for a long time, and can support the motor to accept greater torque during operation, preventing the motor from being damaged due to overload.

2. Using a reduction motor can save costs. Generally speaking, if you don't use a reduction motor and can bear all the load with just one click, the motor will be damaged in less than a month. When using a reduction motor, if the load-bearing capacity is strong enough, the machine will be damaged. Then it must be the geared motor that is damaged, not the motor. The maintenance cost of geared motors is much lower than that of electric motors!

3. The reduction motor can effectively reduce the moment of inertia, and can control the start and stop of the motor in time to achieve the purpose of changing the speed during the process.

4. The use of reduction motors can effectively solve the energy consumption problem of enterprises. The current of the motor can be reduced, thereby reducing the output torque, thereby reducing energy consumption of small businesses.

5. The reduction motor can effectively reduce the motor speed and increase the motor torque. The many advantages provided by geared motors have always been welcomed by the machinery industry.

The above five points are enough to prove the reasons why reduction motors are widely used by major enterprises. The widespread use of geared motors has become an irreversible trend in the current environment, which is crucial for manufacturers in the machinery industry.

Recommended reading

CGXK142

CGXK042

Governor

Advantages and Disadvantages of DC Brushed Motors

Analysis of shaft breakage problem of right-angle planetary reducer