Talk about the importance of reduction motors

As an important part of the transmission products of automation equipment and other mechanical equipment, reduction motors play an important role in the entire transmission system. They also have the advantages of small size, long life, high precision, and no oil leakage. The gear is made of high-strength low-carbon alloy steel carburized and quenched. It also has strong resistance to pitting corrosion and wear resistance. The core has good toughness. Compared with the medium-hardness tooth surface, the strength and strength of the tooth root are improved. service life. However, if the hardness of the hard tooth surface of the produced hard gear reduction motor does not meet the requirements, or if the operation is improper or the use cycle is too long, the wear of the hard gear will be accelerated, thus affecting the normal operation. We need to avoid the above situation from happening.

During use, vibration and noise increase. The main reason for this is generally wear or damage to the components inside the chassis.

Secondly, the parts that may be damaged are gear tooth surface wear, gear tooth breakage, gear shaft hole or keyway wear, the screw hole at the bearing hole is prone to failure due to wear, and the shaft surface and keyway are also prone to wear for too long. If it is due to wear of the shaft hole of the hard-tooth surface reducer motor, let me tell you a simple method, which is to use electroplating to restore the original accuracy of the part; but if the teeth on the hard-tooth surface are damaged due to breakage or other reasons, it will be fatal at that time. Damage cannot be repaired and can only be repaired with new parts.

Therefore, when choosing a hard-tooth surface reduction motor manufacturer, you must first look at the qualifications of the reduction motor manufacturer. During the selection process, you must choose a good model to ensure the safety factor of the hard-tooth surface reduction motor and strictly follow the instructions. To exert the effect of hard tooth surface reducer. The reduction motor should be cleaned regularly. The gearbox cleaning machine uses the original oil supply and discharge system of the gearbox and the filtered old oil to achieve the functions of cleaning the gearbox, quickly filtering the waste oil, and filling in new oil. The operation process does not change the hardware facilities and does not add cleaning agents, ensuring the safe operation of the gearbox and extending its service life.

Recommended reading

CGXK115

Governor

CGX115

Methods to improve the service life of reducer

Commonly used reduction motor classifications