Introduction to the functions and principles of linear reduction motors

1. The function of linear reduction motor

The reduction motor is a power transmission mechanism that uses a gear converter to reduce the number of rotations of the motor to the required number of rotations and obtain larger torque.

2. Working principle of linear reduction motor

Reducers are generally used for low-speed and high-torque transmission devices. The motor, internal combustion engine or other high-speed running power is placed on the gear of the reducer on the input shaft. The large gear meshes less with the output shaft gear to achieve the purpose of deceleration. Generally, there are a few reducers with the same gear principle and achieve the ideal reduction effect. Their size is related to the ratio of the number of gear teeth and the transmission ratio.

3. The difference between linear reduction motors

Different types of reducers (motors), and frequency converters achieve the purpose of motor (motor) speed regulation by changing the frequency of AC current. Energy saving can be achieved by reducing the motor speed through the frequency converter.

4. Different types of reducers have different uses

The linear reduction motor is a relatively precise machine, and its purpose is to increase torque by reducing speed. There are many types of reduction motors. According to the transmission type, they can be divided into planetary gear reduction motors and worm gear reduction motors. According to different transmission series, it can be divided into single-stage and multi-stage reducers. According to the shape of the gear, it can be divided into cylindrical gear reduction motor, bevel gear reduction motor and bevel gear-cylindrical gear reduction motor; according to the arrangement of the transmission device, it can be divided into open, split and coaxial reduction motors.

Recommended reading

CGXZ142

Stepper motor series-42 series

CGXK042

Briefly describe the main features of stepper motors and stepper motor drivers

The dangers of adding too much lubricating oil to the reducer