Linear reduction motor gear manufacturing technology

The linear reduction motor can be called an indispensable component of the gear during use. The expected effect of the mechanical equipment in the operation and use is also related to the quality of the gear. In this way, we have a detailed grasp of the gear manufacturing process of the mechanical equipment.

When the gear is manufactured, the edges of the gear are corrected so there is less chance of collision when the gear rotates. The gear modification here refers to the meshing angle and transmission gear components, so during the contact process, the connection and resolution of the convex gaps can be kept clean, thereby reducing damage during operation, thus increasing the service life of the gear and reducing the cost of the linear reduction motor. Noise caused by damaged gears.

The causes of gear errors must also be controlled during the manufacturing process, and attention must be paid to the surface roughness of the gears during the manufacturing process. When gears are used on a smoother surface, they stay longer, so there is less noise when they are suitable for use.

The unbalance of the gear rotating components must also be manipulated in opposite directions. In addition, the distance between the linear reduction motor box and the standard tolerance between the roller bearings also need to be controlled to ensure that they are not susceptible to excessive vibration and noise.

The above detailed introduction is about the gears used by reducer manufacturers to manufacture linear reduction motors. The quality of gears manufactured through the above production process is already relatively good, so when purchasing machinery and equipment, you must master the gear manufacturing process.

Recommended reading

Planetary reducer

Planetary reducer

CGXZ042

What is the purpose of a geared motor and how does it work?

Selection of reducer lubricating oil viscosity